ceebuild-logo

CLAMPS & CONNECTORS

About The Product


Clamps and connectors are critical electrical hardware components used to establish secure mechanical and electrical connections in overhead lines, substations, and electrical panels. These components ensure proper transmission of electrical current while maintaining mechanical strength and corrosion resistance.

CAPTURE JPG 10

features

1. Material: Aluminium alloy, copper, galvanized steel, brass
2. Corrosion Resistant: Hot-dip galvanized / tin-plated / anodized finishes
3. High Conductivity: Designed to minimize contact resistance
4. Mechanical Strength: Withstands vibration, tension, and environmental stress
5. Thermal Stability: Withstands temperature fluctuations due to high current or weather
6. Compatibility: Available for round, sector, stranded, or 7. solid conductors,br> 7. Tool-Free Options: Some compression/tap connectors are tool-less or crimp-based

usage

1. Power transmission lines (HT & LT)
2. Distribution networks
3. Switchyards & substations
4. Earthing and lightning protection systems

Greenfield and electric wire in Canada

Size and range

application

1.Overhead Lines Suspension clamps, tension clamps, PG clamps, dead-end clamps
2. Substations Busbar connectors, T-clamps, flexible connectors
3.Earthing Systems Earth rod clamps, U-bolt connectors
4.Industrial Panels Mechanical lugs, terminal connectors
5.Tap-offs and Jumpers PG clamps, piercing connectors, bi-metal connectors

installation

Tools Required:
1. Torque wrench
2. Spanner set
3. Compression tool / hydraulic crimper

General Steps:
1. Clean conductor surfaces to remove oxidation.
2.Align conductor properly inside the clamp or connector groove.
3.Tighten bolts uniformly (in sequence) to recommended torque.
4.For compression types, crimp using approved die pattern.
5.Apply joint compound (for bi-metallic connections) to prevent galvanic.