ceebuild-logo

ELECTRICAL THIMBLES

About The Product


Electrical thimbles are metallic protective fittings used primarily in overhead electrical line systems to support and protect the loop of a wire or stay wire when connected to hardware like eye bolts, hooks, or shackles. They prevent wear and deformation of wire ropes at looped ends by providing a smooth, rounded surface for the wire to bend around.

Capture.JPG8

features

1. Material: Mild Steel (MS) / Galvanized Steel / Stainless Steel
2. Surface Finish: Hot-Dip Galvanized (HDG) for corrosion protection
3. Construction: Solid, U-shaped grooved body
4. Functionality: Distributes bending stress, minimizes fatigue
5. Durability: Long-lasting even in outdoor and coastal conditions
6. Compatibility Matches standard stay wire sizes (7/8/10 SWG etc.)
7. Low Maintenance No moving parts, simple visual inspection suffices

usage

1. Used in stay wire assemblies to prevent damage at the looped termination.
2. Provides mechanical protection to wire ropes or stranded conductors where they form loops.
3. Maintains the proper curvature of the wire, ensuring minimal stress concentration.
4. Ensures firm seating of the wire loop on bolts or shackles.

low-angle-view-electricity-pylon-against-sky (1)

size and range

1. Wire Compatibility: 7 SWG to 10 SWG (approx. 3 mm to 4.5 mm wire dia)
2. Thimble Size: Small, Medium, Large
3.Material Thickness: 2 mm to 6 mm
4. Internal Radius : Matches the bend radius of eye bolts and shackles
5. Weight: 50 g to 200 g per piece (varies by size)

standarization

1. IS 2486 (Part 1–4): Accessories for overhead power lines
2. IS 2629 / IS 4759: Hot-dip galvanization standard
3. REC Manual Standards Rural Electrification Corporation construction specifications
4. ASTM A153 / A123: US galvanizing specifications
5. BS EN ISO 1461: International galvanizing standard

application

high voltage electric pole,High voltage power pole on blue sky background

1. Pole Stay Assemblies: Protects loop of stay wires attached to stay rods
2. Distribution Poles: Loop terminations to anchors or bolts
3. Telecommunication Towers: Securing guy wires
4. Transmission Lines: Holding tensioned guy wires on angle/dead-end structures
5. General Purpose Rigging: Any place wire ropes need protected eye termination

installation

1. Form a loop at the end of the stay wire or rope.
2. Place the thimble inside the loop, ensuring the wire sits snugly in the groove.
3. Tighten the loop using clamps, grips, or binding wires to secure the wire around the thimble.
4. Attach the loop to the hook, shackle, or bolt as needed.